Denon AVR-3313 Manual - Audio Products Australia

Surround
Sound Mode (vpage 75)
Surround Parameter
(vpage 113)
NEO:6 Music mode only
Center Image
(vpage 113)
Subwoofer
(vpage 115)
Tone
z19
(vpage 115)
MultEQ ®
XT z20
(vpage 116)
Audyssey (vpage 116)
Dynamic EQ
z21
(vpage 117)
Dynamic Volume
z21
(vpage 117)
Audyssey DSX ®
z20
(vpage 117)
Restorer
z22
(vpage 115)
DIRECT/PURE DIRECT (2channel) z1
S z5
DIRECT/PURE DIRECT (Multi-channel) z1
DSD DIRECT (2 channel) z1
S z5
DSD DIRECT (Multi-channel) z1
STEREO S S S S S
MULTI CH IN S S S S S S
DOLBY PRO LOGIC gz S S S S S S
DOLBY PRO LOGIC gx S S S S S S S
DOLBY PRO LOGIC g S S S S S S S
DOLBY PRO LOGIC S S S S S S S
DOLBY PRO LOGIC g A-DSX S S S S S S S
DOLBY PRO LOGIC A-DSX S S S S S S S
DTS NEO:6 S S S S S S S S
DTS NEO:6 A-DSX S S S S S S S S
Audyssey DSX ® S S S S S S
DOLBY DIGITAL S S S S S S
DOLBY DIGITAL Plus S S S S S S
DOLBY TrueHD S S S S S S
DTS SURROUND S S S S S S
DTS 96/24 S S S S S S
DTS-HD S S S S S S
DTS Express S S S S S S
MULTI CH STEREO S S S S S S
ROCK ARENA S S z23 S S S S
JAZZ CLUB S S S S S S
MONO MOVIE S S S S S S
VIDEO GAME S S S S S S
MATRIX S S S S S S
VIRTUAL S S S S S S
z1 During playback in PURE DIRECT mode, the surround parameters
are the same as in DIRECT mode.
z5 Only when “Subwoofer Mode” is set to “LFE+Main”
(vpage 131), sound is output from the subwoofer.
z19 This item cannot be set when “Dynamic EQ” (vpage 117) is
set to “On”.
z20 This item cannot be set for HD audio exceeding a frequency of 96
kHz or during DSD (SA-CD) signal playback.
z21 This item cannot be set when “MultEQ ® XT” (vpage 116) is
set to “Off” or “Graphic EQ”.
z22 This item can be set when the input signal is analog, PCM 48 kHz
or 44.1 kHz.
z23 In this sound mode, bass is +6 dB, and treble is +4 dB (Default).
162