Denon AVR-3313 Manual - Audio Products Australia
Denon AVR-3313 Manual - Audio Products Australia
Denon AVR-3313 Manual - Audio Products Australia
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Connecting a Blu-ray Disc player<br />
This section describes how to connect when your Blu-ray disc player does not support HDMI connections.<br />
For instructions on HDMI connections, see “Connecting an HDMI-compatible device” (vpage 8).<br />
nn<strong>Audio</strong> connection<br />
The following methods are available for connecting to this unit. Use either of the methods to make<br />
a connection.<br />
The numbers prefixed with connectors indicate the recommendation order. The smaller the number is,<br />
the higher playback quality is achieved.<br />
a DIGITAL AUDIO COAXIAL connector<br />
DIGITAL AUDIO OPTICAL connector<br />
When a multichannel audio (digital bit stream audio) is input, this unit decodes the audio to play<br />
back surround sound. However, digital bit stream audio signals for HD audios from Blu-ray disc<br />
players (such as Dolby Digital Plus and dts-HD) can not be transmitted.<br />
When making this type of connection, you must change the settings on this unit.<br />
(v Input connector setting )<br />
s AUDIO IN (Blu-ray) connector<br />
This makes an analog audio connection. This type of connection converts digital audio to analog<br />
audio, so the output audio may be degraded compared to connections a.<br />
s<br />
Blu-ray Disc player<br />
AUDIO<br />
OUT<br />
L R<br />
L<br />
L<br />
R<br />
R<br />
or<br />
AUDIO<br />
COAXIAL<br />
OUT<br />
a a a<br />
or<br />
OPTICAL<br />
OUT<br />
VIDEO<br />
COMPONENT VIDEO<br />
OUT<br />
Y PB PR<br />
Connecting an HDMI-incompatible device<br />
nnVideo connection<br />
The following methods are available for connecting to this unit.<br />
a COMPONENT VIDEO IN connector<br />
This makes an analog video connection. This connection method separates video signals into 3<br />
signals for transmission based on color components, achieving the best quality video playback<br />
among analog video connections, with less signal degradation.<br />
When making this type of connection, you must change the settings on this unit.<br />
(v Input connector setting )<br />
Input connector setting<br />
When making the following connection, you must change the input connector settings.<br />
a DIGITAL AUDIO COAXIAL connector<br />
When connecting to connectors marked as 1, change “CBL/SAT” to “Blu-ray”.<br />
DIGITAL AUDIO OPTICAL connector<br />
When connecting to connectors marked as 1, change “TV AUDIO” to “Blu-ray”.<br />
a COMPONENT VIDEO IN connector<br />
When connecting to connectors marked as 1, change “CBL/SAT” to “Blu-ray”.<br />
When you want to play back HD <strong>Audio</strong> (Dolby TrueHD, DTS-HD, Dolby Digital Plus, DTS Express) and Multichannel<br />
PCM with this unit, use an HDMI connection (vpage 8 “Connecting an HDMI-compatible<br />
device”).<br />
For how to change, see “Input Assign” (vpage 125).<br />
18