MonitorMagic - Tools4Ever.com

MonitorMagic
Status
error
OK
warning
The general status of the monitor. If not OK, the
MonitorMagic service was not able to collect the
Snmp trap monitor information (completely).
See also:
MonitorMagic SNMP support
MonitorMagic SNMP requirements
Snmp trap monitor: Overview
Snmp trap monitor: Specify monitor
Snmp trap monitor - Snmp trap monitor values
Snmp get
Snmp get monitor - Overview
Tasks of the Snmp get monitor
MonitorMagic uses the Snmp get monitor to collect and process SNMP information from any
host that supports SNMP version 1. With the Snmp get monitor you can perform the following
tasks:
Collect SNMP information from any host that supports SNMP.
Show the collected information in the MonitorMagic user interface application.
Process the collected information and apply rules and execute alarm actions depending
on the values of the collection information.
Show and print graphs of data collected from SNMP hosts.
Store SNMP data in a database for trend analysis, graphing etc.
Show the collected information in the MonitorMagic web interface.
Besides the tasks accomplished by the Snmp get monitor, MonitorMagic can also receive
SNMP traps and send SNMP traps
Principle of operation
To use the Snmp get monitor you should be familiar with the basic concepts of SNMP. When
using Snmp get monitors, each monitor represents one or more data values obtained from a
host that supports SNMP. The monitor specification includes the specification of the host, SNMP
community and object identifiers that must be obtained. The SNMP information is obtained
according to the specified scheduler. As with all other monitors, you can define rules and alarm
actions for the Snmp get monitor. When the data is received, the rules are evaluated and alarm
actions can be executed.
Each Snmp get monitor can collect information for up to 8 object identifiers. Since a lot of SNMP
object identifiers represent cumulative values, MonitorMagic can apply some basic formulas to
calculate more representative information. The calculated data value can be stored in the
database for trending and graphs.
Note that you need to have the Microsoft SNMP service installed and running to use the
Snmp get monitor.
See also:
MonitorMagic SNMP support
Snmp get monitor - Overview
Snmp get monitor - Tables
98