MonitorMagic - Tools4Ever.com

MonitorMagic Web Interface
the machine you're looking at the event log, for you can still use the three buttons seen in the
figure above. Clicking on one of them will perform the corresponding action.
The "All logs..." section of the web interface is a little different than the application, security, and
system event log section. If you click on the "All logs..." section you will see the following:
Clicking on any of the buttons under the "SHOW EVENT LOGS" section will bring up the
corresponding event log. You do not need to have manage access to use the buttons in this
section of the page. The buttons under the "CLEAR EVENT LOGS" section will clear the
corresponding event log, you must have manage access to perform these actions. If you attempt
to clear one of the event logs and you do not have manage access an error page will appear. To
access another aspect of the machine choose another section in the left hand pane of the
browser.
See Also:
System info
Services
Processes
Monitors
Configure MonitorMagic WebService: General
Configure MonitorMagic WebService: HTTP
Configure MonitorMagic WebService: HTTPS
Configure MonitorMagic WebService: Access Rights
Processes
This section details using the processes section of the MonitorMagic web interface. The web
interface can be accessed by specifying a URL that contains the name or IP address, plus port
number, of the computer running the MonitorMagic web service. Examples: http://kraken:81,
https://kraken:443, http://192.168.1.53:81, or https://192.168.1.53:443. To access the processes
information for a machine you must navigate to the name of the machine, on the left hand pane of
the browser, and click the Processes section which is seen in the following example:
351