MonitorMagic - Tools4Ever.com

MonitorMagic topics
ObjectOid : 1.3.6.1.4.1.11392.1.1.2.0
(iso.3.6.internet.private.enterprises.tools4ever.monitormagic.1.2.0)
type: Octet string.
value:
Note that since this is the only string variable it is normally automatically correct interpreted and
displayed by a SNMP management application.
For more information see the documentation with your specific SNMP management Application.
See Also:
Introduction SNMP traps
Requirements SNMP traps
Configure MonitorMagic SNMP traps
Troubleshooting MonitorMagic SNMP traps
SNMP trap
Pager - SMS
Introduction to pager - SMS
As an alarm action, MonitorMagic can send a message to an pager or mobile telephone (SMS).
This is done by using a modem, connected to the server that runs the MonitorMagic service. The
pager - SMS messages are sent by the MonitorMagic service depending on the configured alarm
actions. See Alarm actions overview for more information. To use pager and SMS messaging,
you need to install and configure the modem and specify some settings in MonitorMagic.
General operation
The following list describe the actions executed by MonitorMagic service and provider when
sending a pager - SMS message:
A monitor is checked by the MonitorMagic service. A monitor rule is triggered and and
pager - SMS alarm action must be executed.
The MonitorMagic service queues the pager - SMS alarm action.
The MonitorMagic initializes the connected modem and calls the configured pager - SMS
provider.
When the connection is setup, the MonitorMagic service instructs the provider to send a
message to the specified pager - mobile telephone number.
MonitorMagic terminates the call with the pager - SMS provider and is ready to send the
next pager - SMS message.
The pager - SMS provider sends the message and the pager or mobile telephone
receives the message.
Note: Many mobile telephones and pagers can receive E-mail messages. If your mobile
telephone or pager can receive E-mail messages you can also use this feature with MonitorMagic.
In this case, you need to configure E-mail alarms. Contact your pager - mobile telephone provider
to find out if your mobile telephone - pager is able to receive E-mail messages.
See also:
Alarm actions overview
Introduction to pager - SMS
Pager - SMS installation and configuration overview
Pager - SMS modem installation and configuration
Pager - SMS provider selection
Pager - SMS managing provider configuration settings
287