MonitorMagic - Tools4Ever.com

Using MonitorMagic
flags
Output
analysis flags
Database
storage
Evaluation
time
0 Output analysis flags
The specification if monitor data must be stored in the
database.
09:07:00 08-16-2001 The time and date of the last ping sent to the host
Status OK, Warning, Error The general status of the monitor. If not OK, there was
no response from the remote host.
MonitorMagic
service
Tulip
See also:
Command monitor - Overview
Command monitor - Specify monitor
Policies, Monitors, Rules and Alarm actions
The name of the computer that runs the MonitorMagic
service that processes this monitor.
Scheduling
Scheduling overview
MonitorMagic supports a number of methods to schedule the processing of monitors. The
scheduling controls how often and when the monitors must be processed. In most circumstances,
monitors will be processed on an interval basis. But there are a number of different scenario's
possible.
The scheduling parameters can be specified for each individual monitor. So each monitor can
have its own scheduling schema. Normally you specify the scheduling parameters as part of the
policy. When the policy is applied and the monitors are generated the scheduling parameters are
copied to each monitor.
To configure the scheduling parameters, select the monitor of the policy or a monitor from the
monitor window. Right click the mouse and select menu option Properties. In the window shown,
select the tab Scheduling.
117