Mplus Users Guide v6.. - Muthén & Muthén

OUTPUT, SAVEDATA, And PLOT CommandsY4 1.065 0.974 0.992 1.551X 0.593 0.453 0.506 0.524 0.912CorrelationsY1 Y2 Y3 Y4 X________ ________ ________ ________ ________Y1 1.000Y2 0.665 1.000Y3 0.672 0.652 1.000Y4 0.675 0.641 0.661 1.000X 0.489 0.389 0.440 0.441 1.000CROSSTABSThe CROSSTABS option is used to request bivariate frequency tablesfor pairs of binary, ordered categorical (ordinal), and/or unorderedcategorical (nominal) variables. Row, column, and total counts aregiven along with row, column, and total percentages for each category ofthe variable and the total counts. The CROSSTAB option has thefollowing settings: ALL, COUNT, %ROW, %COLUMN, and%TOTAL. The default is ALL. These settings can be used to requestspecific information in the bivariate frequency table. For example,CROSSTABS (COUNT %ROW);provides a bivariate frequency table with count and row percentages.STANDARDIZEDThe STANDARDIZED option is used to request standardized parameterestimates and their standard errors. Standard errors are computed usingthe Delta method. Only symmetric confidence intervals are availableusing the CINTERVAL option of the OUTPUT command.Three types of standardizations are provided as the default. The firsttype of standardization is shown under the heading StdYX in the output.StdYX uses the variances of the continuous latent variables as well asthe variances of the background and outcome variables forstandardization. The StdYX standardization is the one used in the linearregression of y on x,b StdYX = b*SD(x)/SD(y),641