Mplus Users Guide v6.. - Muthén & Muthén

OUTPUT, SAVEDATA, And PLOT Commandsand Upper 5%, respectively, contain the lower and upper bounds of the90% confidence interval. The second and sixth columns of the outputlabeled Lower 2.5% and Upper 2.5%, respectively, contain the lowerand upper bounds of the 95% confidence interval. The first and seventhcolumns of the output labeled Lower .5% and Upper .5%, respectively,contain the lower and upper bounds of the 99% confidence interval.SVALUESThe SVALUES option is used to create input statements that containparameter estimates from the analysis. These values are used as startingvalues in the input statements. The input statements can be used in asubsequent analysis in the MODEL or MODEL POPULATIONcommands. Not all input statements are reported, for example, inputstatements with the | symbol followed by ON, AT, or XWITH. ForMODEL CONSTRAINT, input statements are created for only theparameters of the NEW option. Input statements are created as thedefault when a model does not converge. To request that these inputstatements be created, specify the following:SVALUES;NOCHISQUAREThe NOCHISQUARE option is used to request that the chi-square fitstatistic not be computed. This reduces computational time when themodel contains many observed variables. The chi-square fit statistic iscomputed as the default when available. To request that the chi-squarefit statistic not be computed, specify the following:NOCHISQUARE;This option is not available for the MONTECARLO command unlessmissing data are generated.NOSERRORThe NOSERROR option is used to request that standard errors not becomputed. This reduces computational time when the model containsmany observed variables. To request that standard errors not becomputed, specify the following:649