Operator's Manual - Sirona - Technical Documentation

Sirona Dental Systems GmbH DesignOperator's Manual7.3.3 Entering a preparation margin with unclear edgesIf you press the space bar while entering the preparation margin, the systemswitches to the interpolating method (spline function) and you can set individualpoints by clicking.NOTICESetting points close togetherSet the points exactly on the edge and close to one another.If the optical impressions have been made with the CEREC 3D camera or withinEos*, the switch is made to intensity image.*In the case of inEos optical impressions which contain a rotational scan, orin case of optical impressions made with the scanner, the system does notswitch over to intensity image.båÖäáëÜIn the case of optical impressions made with the CEREC Bluecam, the normalmodel continues to appear. If you wish to see the intensity image in unclearsituations, press the space key once again. When the space key is pressedfor the third time, the system switches to the edge detection method again.7.4 Redefining the insertion axisCEREC onlyIf you have activated the "Insertion axis step activ" option under "Settings" /"Configuration"/ "Options", the "Insertion axis" tool is automatically activatedat the following time.●●While the preparation margin can be edited,Before the restoration is suggested.59 56 458 D 3344D 3344.208.05.14.02 04.2011 109