Operator's Manual - Sirona - Technical Documentation

MessagesError messagesSirona Dental Systems GmbHOperator's ManualThis type of error typically occurs whenever the construction lines are unsuitable.It may, however, also be caused by a program error.When you click Yes, a dialog box with further details and hints opens.The error description, i.e. the ID, is used by the hotline or development teamto analyze and eliminate the problem.In most cases, you can continue to work with the restoration data after acknowledgingthe error. However, just to make sure, you can create a copy andwork with this copy. In this way, you can always recur to the original opticalimpression in case further problems occur.12.3.4 Errors in the reconstruction of the restorationErrors in the reconstruction of the restorationThis error may occur if the restoration is to be milled. In this case, the restorationto be milled cannot be calculated with the available construction lines.As before, you can usually continue to work with the restoration data afteracknowledging this error message. For reasons of safety, you may of coursework on a copy.Check and correct all construction lines, if necessary.12.3.5 System errorsSystem errorsA system error may occur due to an error in the program.59 56 458 D 3344166 D 3344.208.05.14.02 04.2011