Operator's Manual - Sirona - Technical Documentation

Sirona Dental Systems GmbH SoftwareOperator's Manual3.5 Copy protection (softguard dongle)3.5.1 IntroductionWhether a given restoration may be milled depends on the softguard dongleconnectedand the identifier of the milling unit used.3.5.2 Softguard dongleHeadingSoftguard dongleThe following softguard dongles are available:CEREC 3D●CEREC 3D (for inlays, onlays, crowns and veneers)AK x CEREC●AK x 1 (only in conjunction with the inLab 3D software).Explanation of AKAK = Activation KeyDebiting from AK xThe AK x softguard dongles have a counter that deducts one unit for each millingoperation:Overview of debitingRestorationInlay, onlay,occlusal inlayCrownVeneerCrown frameworkWax-up, Bridge correlationBridge framework, anatomicalbridgeAbutmentDebit from AK x1 unit per restoration1 unit per restoration1 unit per restoration1 unit per restoration1 unit per milling operation1 unit per bridge element1 unit per bridge abutment1 unit per restorationbåÖäáëÜ3.5.3 Connecting the softguard dongleemptyAKx✔ The PC must have a parallel port.1. Connect the softguard dongle to the parallel port of the PC.2. You may then connect further softguard dongles or e.g. a printer to thissoftguard dongle.empty1. x = Remaining number of units (that can be milled with this activation key)59 56 458 D 3344D 3344.208.05.14.02 04.2011 19