Operator's Manual - Sirona - Technical Documentation

Sirona Dental Systems GmbH User interface in Master ModeOperator's Manual4. Setting the end point of the correction line:Closed line (e.g. crown equator)Double-click the construction lineOpen line (e.g. fissure line)Double click at the desired new end point of the line.NOTICEUndoing changesYou can undo the last change made in the line profile by clicking the "Undo"icon.NOTICEChanging the connection to the preparation marginIf you want to change the connection to the preparation margin (red dot),grab the red dot with the left mouse button and move it along the preparationmargin.5.4.2 Form tool (Form)By clicking the "Form" button, you can activate or deactivate the "Form" tool.båÖäáëÜApplymaterialRemovematerialBlendmaterialYou can use this function to● apply material● remove material● blend materialClicking on the symbol activates the corresponding mode.NOTICEAlternativeUsing the space bar on the keyboard, you can change functions in the followingorder:Apply > Remove > Blend > Apply ...5.4.2.1 Changing the size of the layer to be appliedWhen you start this tool, the diameter of the layer to be applied is 1.35mm.SliderThe slider allows you to modify the size of the layer to be applied.59 56 458 D 3344D 3344.208.05.14.02 04.2011 39