Operator's Manual - Sirona - Technical Documentation

Sirona Dental Systems GmbH Restoration types and design techniquesOperator's Manual4. Following the reconstruction of the model, you have the option to trim themodel as well as to determine the preparation line and insertion axis.5. You are subsequently prompted to enter the tooth position of the tooththat you wish to use as the reference. Confirm your selection in the toothmodel by clicking the "OK" button.6. If you selected the contralateral tooth as the reference, you can choosebetween creating the restoration by mirroring the contralateral tooth or bymeans of biogeneric reconstruction.7. The acquisition of the reference tooth is subsequently displayed in gray.Double-click on the center of the occlusal surface, in the case of anteriorteeth click on the center of the incisal edge. A biogeneric suggestion is now reconstructed.8. You then have the option of adjusting and milling the suggestion withstandard tools.10.6 Quadrant restoration (in Master Mode only)10.6.1 Design example for teeth 14 to 1710.6.1.1 Preparing, drying and powderingbåÖäáëÜPowdering the working fieldAfter you have made and dried the preparation, powder the working field.10.6.1.2 Acquiring tooth 16Instructions✔ You have selected a patient from the database or created a new patient.1. Select the following options in the New dialog box.NOTICEStart with an inlay if necessaryIf an inlay is also to be provided, then start with this restoration.2. Click "OK". The arrow cursor jumps automatically to the button marked "Acquirepreparation".Range"Restoration""Design technique"ValueTooth 16"Inlay, Onlay, Partial crown""Biogeneric"Starting an optical impression➢ Acquire an optical impression of the central cavity for tooth 16.59 56 458 D 3344D 3344.208.05.14.02 04.2011 159