Operator's Manual - Sirona - Technical Documentation

Sirona Dental Systems GmbH User interface in Master ModeOperator's Manual5.5 Status barDescriptionStatus barNOTICEShowing/hiding the status barThe status bar can be shown or hidden via the "Window"/"Status bar" menuitem.The status bar provides current information about:●●●●●A: the steps to be performed,B: the current activity of the milling unit,C: with restoration and preparation displayed, the ceramic thickness atthe mouse cursor position. The field is colored red if the position of themouse cursor exceeds the material thickness.D: the minimum fissure heightE: the height of the preparation / occlusion at the mouse cursor positionbåÖäáëÜ5.6 Design window5.6.1 Design window (3D viewer)CEREC 3D contains a main window (3D viewer) for visualizing and designinga restoration in 3D.The 3D viewer opens after all image fields have been acquired. The time upto display of the viewer depends upon the number of image fields and thenumber of single optical impressions.You can do the following in the Design window:● view the image fields of the preparation, of the occlusion and of the antagonistsas well as the restoration, either individually or in any combination,● determine a new insertion axis,● hide an image region by entering an open line mesially and distally,● enter the preparation margin,● immediately see the effects caused by applying a tool (e.g. editing, scaling...)● view the restoration in the milling simulation before machining,● rotate the objects arbitrarily. To do so, press and hold down the leftmouse button and move the mouse in the desired direction.● For better orientation, the direction is indicated (e.g. mesial, lingual, etc.).59 56 458 D 3344D 3344.208.05.14.02 04.2011 47