Operator's Manual - Sirona - Technical Documentation

Restoration types and design techniquesQuadrant restoration (in Master Mode only)Sirona Dental Systems GmbHOperator's Manual10.6.1.3 Acquiring supplementary optical impressions1. Acquire optical impressions of the mesial neighbors (tooth 15 and thentooth 14).2. Acquire an optical impression of the distal neighbor (tooth 17).10.6.1.4 Tooth 16: Creating the restorationRestoration of tooth 161. Define tooth 16 as the center (see "Centering" under "Design" [ ➙ 58]).2. Create a restoration.3. Save the restoration.4. Select "Design"/"Quadrant…" (see "Quadrant" under "Design" [ ➙ 57]). The New dialog box opens. The patient is accepted.5. In the New dialog box, you can select the following and confirm "OK". The virtual seating and the start of a second CEREC 3D programthen occur.In the program running in the foreground, the old restoration is in itsoriginal state.LimitationsCAUTIONFollowing virtual seating you may no longer perform the following: use the"Undo"button to return to the "Optical impression" work step, remove or addimages or change the reference image!6. Mill the restoration.10.6.1.5 Tooth 15: Creating the restorationTooth 16 seated virtually, restoration of tooth 15The program with the virtually seated restoration is loaded in the background.You can bring the program to the foreground via the task bar or by pressingthe task selection keys (Alt+Tab).The finished design (tooth 16) appears as the tooth in the new display.59 56 458 D 3344160 D 3344.208.05.14.02 04.2011