Operator's Manual - Sirona - Technical Documentation

User interface in Master ModeMenu barSirona Dental Systems GmbHOperator's ManualNOTICENote on bridge frameworks and implantsBridge frameworks/implantsThis software does not allow the loading and importing of bridge frameworksand implant mesostructures.5.7.1.3 Deleting a restorationDeleting a graphic restorationDeleting a restorationInstructions1. Select "Restoration"/"Delete…". The "Delete restoration" dialog box opens.2. Select the restoration you would like to delete.3. Click the "Delete" button. You will be asked if the restoration should be deleted.4. Confirm by clicking the "Yes" button. The restoration will then be deleted.To display the preview, a check mark must be placed in front of "Show Preview".3D model/preparation previewThe preview shows either the preparation impression or the 3D model of thepreparation, provided it has already been reconstructed.NOTICERotating a 3D previewNote on rotating the 3D previewThe 3D preview can be rotated with the mouse and viewed from all sides(control the same as for rotating the model in the 3D viewer).5.7.1.4 Exporting a restoration or scan dataInstructionsIf a restoration is open, it can be saved in compressed form at any location.✔ You have opened a restoration.1. Select "Restoration"/"Export…". A standard Windows file dialog box opens.2. Select the target folder to which you want to export the restoration.3. Assign any name to the restoration.4. Click the "Save" button. The restoration is exported.CEREC file typeThe restoration can be saved under any name, but the file type used must be"*.cdt" or "*.idt". If you want to export a restoration for use in GALILEOS Implant,you can create files with the file type *.ssi from the milling preview. AnOpenSI dongle is a prerequisite for this.59 56 458 D 334452 D 3344.208.05.14.02 04.2011