Operator's Manual - Sirona - Technical Documentation

Restoration types and design techniquesBiogenericSirona Dental Systems GmbHOperator's Manual10.3.4.8 Examining the milling previewinLab/CEREC partial crown with antagonist image for tooth 1710.3.4.9 MillingMilling simulationInstructionsThe finished restoration is displayed in the milling preview (see ".Milling preview[ ➙ 114]“).1. Inspect the restoration.2. Select the desired milling mode.3. Set the sprue location on a flat, convexly curved side.Instructions1. If you are satisfied with the restoration, click the "Mill" icon (see "Mill" [ ➙114]).2. Start the milling process (see also Operating Instructions of the millingunit).10.3.5 Design example of crown with antagonist image for tooth4710.3.5.1 Creating a new restorationInstructions✔ You have selected a patient from the database or created a new patient.1. Select the following options in the New dialog box.2. Click "OK".Preparations47 - Crown - dental database - CERECRangeTooth 47ValueIn Master mode you additionally select:"Restoration""Design technique""Crown""Biogeneric"59 56 458 D 3344138 D 3344.208.05.14.02 04.2011