Operator's Manual - Sirona - Technical Documentation

Sirona Dental Systems GmbH IntroductionOperator's Manual1.3 GeneralIn order to effectively address the needs of new and experienced CERECusers, the software has been split into two parts - CEREC 3D mode and "MasterMode".1.3.1 CEREC 3D softwareThe CEREC 3D software has been optimized for easy and efficient design ofinlays, onlays and crowns with the aid of the "Biogeneric" design techniquewith or without antagonist.Changeover to the "Master Mode" is advisable only for users who have masteredall the basic procedures of the CEREC 3D method.A description of these functions can be found under "User interface of the CE-REC 3D software" [ ➙ 21].1.3.2 Master Mode optionYou can select the "Master Mode" by selecting the menu option "Settings" /"Master Mode" . This displays all functions of the software.A description of these functions can be found under "User interface in MasterMode".båÖäáëÜ1.4 General informationCAUTIONBe sure to observe all warnings!Please observe the warning and safety information provided to prevent personalinjury and material damage. Any such information is highlighted by asignal word, i.e. WARNING, CAUTION or NOTE.Please read this document completely and follow the instructions exactly. Youshould always keep it within reach.Original language of the present document: German.59 56 458 D 3344D 3344.208.05.14.02 04.2011 13