Operator's Manual - Sirona - Technical Documentation

Sirona Dental Systems GmbH Restoration types and design techniquesOperator's ManualInstructions1. Enter the preparation margin (see "Entering the preparation margin" [ ➙108]) and check it by rotating the preparation.NOTICEDirectly editing the preparation marginThe preparation margin can be edited immediately after it is entered (seeEditing tool (Edit)).2. Click the "Next" button. A menu appears in which you can select the type of tooth shape.3. Select "Individual" for the biogeneric calculation using the neighboringteeth.or➢ If no suitable neighboring teeth are available, select a preferred toothshape: "adult", "youth", "lepto", "athlet", "pykno" or "asia".4. Confirm your choice by clicking the "OK" button. The restoration is calculated and then displayed.10.3.5.8 Performing the design✔ A biogeneric suggestion is calculated automatically. This process cantake several minutes, depending on the hardware configuration.1. You can use the "Position" and "Rotate" tools to align the restoration asrequired.2. Using the "Design" tools "Scale", "Edit", "Shape", "Form", and "Drop", youcan modify the restoration until it fits perfectly into the overall environment.3. You can use the "Antagonist" button to display the "Antagonist" window(see "Show/hide antagonist [ ➙ 33]") and with the aid of the "Design"tools, you can adapt the occlusal surface to the antagonist.4. After the design is finished, click on the "Next" button.båÖäáëÜ59 56 458 D 3344D 3344.208.05.14.02 04.2011 141