Operator's Manual - Sirona - Technical Documentation

User interface in Master ModeMenu barSirona Dental Systems GmbHOperator's Manual5.7.3.2 InstrumentsCERECSee also the chapter on "Changing burrs" in the Operating Instructions for themilling unit.1. Select the "Settings" / "Instruments" menu item.NOTICEMultiple milling units connectedIf several milling units are connected, a dialog box will appear from whichyou must select the desired milling unit and confirm with "OK".Selecting a milling set2. If the (optional) bur set 2 is integrated in CEREC MC XL, a dialog is openedwhich allows you to select the bur set in which you want to change amilling instrument. The motors run to the position for changing the milling instruments.The "Change instruments" dialog box opens.3. Select the milling instrument(s) you would like to change to and click"Start".59 56 458 D 334464 D 3344.208.05.14.02 04.2011