Operator's Manual - Sirona - Technical Documentation

Sirona Dental Systems GmbH Optical impressionOperator's Manual3. Support the camera with the front part of the camera support on a toothso that you can hold it quietly during the acquisition phase.NOTICEPowder on the surface of the prismIf the prism touches powdered surfaces, then powder usually remains on theprism surface and generates dark spots in the image.The powder can be wiped off from the prism with a soft cloth.emptyCapturing a Bluecam optical impressionTaking the scan➢ Take the scan as described under "Acquisition control" [ ➙ 78].emptyConcluding the optical impressionConcluding the optical impression➢To exit the acquisition mode, click the icon marked "Next".empty6.1.3 Supplementary optical impressionsAcquiring the neighboring teeth as wellbåÖäáëÜIf the neighboring teeth are to be completely imaged as well, then the imagefield can be extended by further optical impressions of these teeth. The overlaparea of two neighboring optical impressions should be approx. 8mm.Overlap area 8mm✔ You have taken the reference optical impressions as described in thechapter "Single optical impression" under "Preparing the opticalimpression" and "Capturing the optical impression".NOTICEInsertion axisThe reference optical impression determines the original insertion axis,which can be modified later, if required.1. Click briefly to include the reference optical impression.59 56 458 D 3344D 3344.208.05.14.02 04.2011 81