Operator's Manual - Sirona - Technical Documentation

Sirona Dental Systems GmbH User interface in Master ModeOperator's Manual5.7.3.1.8 SpacerRecommended settings for CERECRecommended setting:3D camera, powdered surfaces 0 µm(condition on delivery)3D camera, CAM base model withoutpowder50 µmScanner, CAM base model with 50 µmpowderScanner, CAM base model without 80 µmpowderDescriptionThe program enables you to consciously create space for the adhesive bondingof the crown or inlay using the Spacer spin box.ABCbåÖäáëÜSpacer (exaggerated representation)ABCRestorationSpacerResidual toothIf you increase the value, more space will be created. The setting can be adjustedin increments of 10µm between -100µm and 100µm.NOTICEThis setting affects the calculation of the restoration.Recommended setting for CERECRecommended setting:When using powder 0 µm(condition on delivery)Plaster model without powder (inlay,30 µmcrown)5.7.3.1.9 Scan step widthemptyOnly with integrated scannerIf using the scanner (optional) to acquire the optical impression, you can setthe resolution with"Scan step width" .DescriptionYou can select a resolution of between 3 and 5. Setting the scan step widthlower increases the scan time as well as the accuracy of the optical impressiondata record.59 56 458 D 3344D 3344.208.05.14.02 04.2011 63