Operator's Manual - Sirona - Technical Documentation

User interface in Master ModeMenu barSirona Dental Systems GmbHOperator's ManualNOTICERisk of collisionThe restoration may become damaged if longer milling instruments are presentin the deactivated bur set than in the active set.➢ Ensure that milling instruments installed in the deactivated bur set are nolonger than those in the active set.emptyMC XL scannerScannerWhen using the internal scanner, the check mark must be set in front of"Scanner".emptyBarcode readerBarcode readerWhen a barcode reader is used, the corresponding checkbox must be activated.This ensures that the barcode reader is always used to read a barcode,even if the scanner is also active. In this case the scan function can still beused.5.7.3.3.2 Acquisition system5.7.3.3.3 SaveAcquisition system configurationVia the menu item "Settings" / "Configuration" / "Acquisition system" you canselect the following:● "3D camera"● "Scanner"● "inEos"Saving the configurationVia the "Settings"/"Configuration"/"Save" menu item you can:59 56 458 D 334470 D 3344.208.05.14.02 04.2011