Operator's Manual - Sirona - Technical Documentation

Sirona Dental Systems GmbH User interface of the CEREC 3D softwareOperator's ManualNOTICECalibrating the Bluecam/3D cameraIn order to calibrate the Bluecam/3D camera, the "Bluecam calibration set"/"3D calibration set" is required.The "Bluecam calibration set"/"3D calibration set" must not be powdered.●calibrate the "Milling unit",(see chapter on “Calibrating the milling unit” in the operating instructionsfor the milling unit).emptyMaster ModeIf you select "Settings"/"Master Mode" from the menu, all software functionsare shown.båÖäáëÜIf you select the "Settings" / "Exit Master Mode" menu item, the unit is resetto its delivery status (CEREC 3D Mode).A detailed description of the individual menu items can be found under "Settingsmenu".4.2.3 Window menu in the CEREC 3D modeRestoring the default settingsYou can restore the default setting for the display of the windows/tool bar onthe screen:"Window" / "Reset" or "Ctrl+R"4.2.4 "?" menu in the CEREC 3D modeIf the menu item "Text prompts" the next work step is described in a balloonin the status bar.A detailed description of the individual menu items can be found under ""?"menu".59 56 458 D 3344D 3344.208.05.14.02 04.2011 25