Operator's Manual - Sirona - Technical Documentation

Sirona Dental Systems GmbH User interface in Master ModeOperator's ManualNOTICEAlternativeIf you click on the restoration with the right mouse button, you can modifythe size of the wax drops:Increase size of wax drops – push mouse forward while holding down theright mouse button.Decrease size of wax drops – drag mouse backward while holding down theright mouse button.The next drops can be applied using this size. This size remains active untilyou change the size again or deactivate the "Form" tool.The ratio between material thickness and radius of the drops is 1:70.5.4.3.2 Applying materialApplication can be performed in two ways:● Drop by drop, by clicking the desired point of the restoration● Apply a row of drops in material color by holding down the left mouse buttonand moving the cursor. The density of the drops is controlled by thespeed with which you move the cursor.båÖäáëÜ5.4.3.3 Removing materialRemoval can be performed in two ways:● Drop by drop, by clicking the desired point of the restoration● Remove a row of orange colored drops by holding down the left mousebutton and moving the cursor. The density of the drops is controlled bythe speed with which you move the cursor.5.4.3.4 Blending materialThe cursor assumes the shape of a hand and can then be used to blend orsmoothen the surface locally; to do so, press and hold down the left mousebutton.5.4.4 Scaling tool (Scale)DescriptionBy clicking the "Scale" tool, you can activate the scaling function. This functionenables you to scale a selected region.Scaling rangeFirst select the region to be scaled by clicking one of the lines.59 56 458 D 3344D 3344.208.05.14.02 04.2011 41