Operator's Manual - Sirona - Technical Documentation

Sirona Dental Systems GmbH User interface in Master ModeOperator's Manual5.7.4.1.1 Minimum thicknessIf this option is checked, a minimum thickness geometry which is set in theparameter dialog box is displayed (see Minimum thickness [ ➙ 61]).5.7.4.2 Image catalogDescription for CERECGraphics: Image catalogUsing the function "Window"/"Image catalog" you can show or hide the"Image catalog".You can manage the image fields of the preparation, of the occlusion and ofthe antagonists in the "Image catalog" window (see "Image catalog [ ➙ 90]“).båÖäáëÜ5.7.4.3 3D Preview5.7.4.4 CursorDescriptionYou can show or hide the 3D preview via "Window"/"3D Preview".You can manage the image fields of the preparation, of the occlusion/articulationand of the antagonists 3-dimensionally in the "3D Preview" window (see"3D Preview" [ ➙ 94]).Bluecam onlyThis function is only available for scanning with the Bluecam/3D camera.inEos Blue onlyThe 3D preview can only be used for scans with inEos Blue.DescriptionGraphics: CursorIn the "Cursor" window, the current position of the cursor (arrow tip) in the activewindow is displayed as an absolute value. The zero point of the absolutecursor position is located in the distal and the lingual (or buccal) direction fromthe model.The first line shows the x, y value at the cursor position.The second line shows the height value at the cursor position.5.7.4.5 DistancePositioning windowsYou can drag the "Cursor" window with the mouse by grabbing its title bar anddrop it at any position on the screen.If you select the function "Window"/"Distance", the "Distance" window is displayed.✔ The "Distance" window opens.1. Left-click to set the desired starting point of the distance to be measured.2. Move the mouse to the desired end point.3. Left-click to set the end point.59 56 458 D 3344D 3344.208.05.14.02 04.2011 75