Operator's Manual - Sirona - Technical Documentation

Sirona Dental Systems GmbH Optical impressionOperator's Manual6.2.4 Crown framework scanning techniqueThis scanning technique is used for crown preparations that are fastened toa model holder for bridge framework. One scan is performed.NOTICEDisplay of assignmentIf you insert the model in the model holder so that B lies mesially to the leftof groove A, the mesial/distal assignment will be displayed correctly in thesoftware.B15°A6.2.5 15° scanning technique for quadrant restorationNOTICEInlay for a quadrant restorationIf an inlay is also to be supplied in connection with a quadrant restoration,first select Inlay as the restoration type in the New dialog box and begin withthis restoration. The quadrant model is then scanned from the 15° directionof view:– one scan: + 15°– one scan: -15°båÖäáëÜ15°6.2.6 Scanning antagonistsWith this scanning technique, one scan is performed from the occlusal view(0°).CAUTIONPosition of model must not be changedMake sure that the position of the model is not changed between the scanof the antagonists and the scan of the preparation.NOTICEImage regionsThese two image fields do not have to have any corresponding image regions(neighboring teeth).59 56 458 D 3344D 3344.208.05.14.02 04.2011 87