Operator's Manual - Sirona - Technical Documentation

Sirona Dental Systems GmbHOperator's ManualGlossary3D PreviewAfter you trigger the optical impression, the measurement data are displayed3-dimensionally.3D viewerMain windowAngled optical impressionsEditAdditional optical impressions of the same area with a maximum permissibletilt angle of 20°.Tool (button) for activating/deactivating the editing function which can beused to modify design lines.Image catalogWindow for managing the image fields (preparation, occlusion and antagonist)Image fieldOne or more optical impressions of the preparation, of the occlusion or ofthe antagonist impression.Insertion axisThe direction of view of the camera / scanner (occlusal aspect) mustagree with the insertion axis of the restoration.Intensity imageWindow for more accurately drawing the cervical segments of the preparationmargin in epigingival areas. You can activate the intensity imagewith the spacebar while entering the preparation margin.Occlusal optical impressionOptical impression of an existing or waxed-up occlusion.Reference optical impressionFirst optical impression that determines the original insertion axis.Single optical impressionA single optical impression that must be taken in the occlusal direction(insertion axis).Softguard donglePlug that is connected to the parallel port or the USB port of the PC andenables different milling options.Supplementary optical impressionsSeveral optical impressions that also image the mesial and distal neighbors.59 56 458 D 3344176 D 3344.208.05.14.02 04.2011