Operator's Manual - Sirona - Technical Documentation

Sirona Dental Systems GmbH Restoration types and design techniquesOperator's Manual10.3.2.7 Examining the milling previewMOD inlay with lingual extension for tooth 27 inLab/CERECMilling previewInstructionsThe finished restoration is displayed in the milling preview (see ".Milling preview[ ➙ 114]“).1. Inspect the restoration.2. Select the desired milling mode.3. Set the sprue location on a flat, convexly curved side.båÖäáëÜ10.3.2.8 MillingInstructions1. If you are satisfied with the restoration, click the "Mill" icon (see "Mill" [ ➙114]).2. Start the milling process (see also Operating Instructions of the millingunit).10.3.3 Design example for MOD inlay with antagonist image ontooth 16MOD = Mesio-occluso-distal10.3.3.1 Creating a new restorationInstructions✔ You have selected a patient from the database or created a new patient.1. Select the following options in the New dialog box.2. Click "OK".Preparations16 - Inlay, onlay, partial crown - dental database - CERECRangeTooth 16ValueIn Master mode you additionally select:"Restoration""Design technique""Inlay, Onlay, Partial crown""Biogeneric"59 56 458 D 3344D 3344.208.05.14.02 04.2011 129