Operator's Manual - Sirona - Technical Documentation
Operator's Manual - Sirona - Technical Documentation
Operator's Manual - Sirona - Technical Documentation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Sirona</strong> Dental Systems GmbH User interface in Master Mode<strong>Operator's</strong> <strong>Manual</strong>5.7.3.3.1.6 Configuration (CEREC MC XL)Configuring graphic devicesemptyConfiguring devices (CEREC MC XL)DescriptionThe various settings can be subsequently changed via the "Configure" button.<strong>Manual</strong> block fixing<strong>Manual</strong> block fixingbåÖäáëÜWhen using the manual block clamp, the check mark must be set in front of"<strong>Manual</strong> Block Fixation".emptyTitle: Deactivating the CEREC bur setDeactivating a bur set (only for milling units with 4 motors)Description of deactivation of bur setIt may sometimes prove necessary to deactivate a bur set, e.g. as long as itis not possible to replace a defective milling instrument or in case a millingmotor is defective or cannot be calibrated.In all of these cases, you can deactivate sets 1 and 2 separately in the "DeviceConfiguration" dialog box. A deactivated set will simply be ignored during milling,calibration etc.59 56 458 D 3344D 3344.208.05.14.02 04.2011 69
Change language