Operator's Manual - Sirona - Technical Documentation

Sirona Dental Systems GmbH Optical impressionOperator's ManualAutomatic acquisition control✔ A window is opened for a new restoration.1. Position the cursor on the acquisition icon (e.g. "Acquire preparation").2. Press the foot control upward briefly. As soon as a sharp optical impression can be captured, images areautomatically generated and transferred to the 3D preview.3. Press the foot control upward briefly. The optical impression is completed.båÖäáëÜ4. By positioning the cursor on another acquisition icon (e.g. "Acquire occlusion"or "Acquire antagonist") and repeating steps 2-3, additional opticalimpressions can be captured in the occlusion or antagonist model5. To exit the acquisition mode, click the icon marked "Next".emptyChanging from automatic to manual acquisition controlIf you press the foot control upward and keep it pressed during an automaticexposure, this changes the program back to manual acquisition control.6.1.2 Single optical impressionemptyInformation on single tooth restorationReference optical impressionAs a rule, a single optical impression is sufficient for single tooth restorations.It must be taken in the occlusal direction (insertion axis) and is called referenceoptical impression.Selecting the design techniqueAs soon as you have selected a tooth and a design technique, the "Acquirepreparation" icon is activated in the tool bar. The cursor then jumps to thisicon.59 56 458 D 3344D 3344.208.05.14.02 04.2011 79