Manual - Famco

Chapter 6 - Parameter Description [FU2]FU2-69: Accel/Decel Change FrequencyFU2►Acc/Dec ch F69 0.00 Hz69Factory Default: 0.00 Hz 0This function is used to change Accel/Decel ramp at acertain frequency. This is useful in textile machineapplication.☞ Note: If the multi-function input terminal (I/O-12 ~ I/O-14)is set to ‘XCEL-L’, XCEL-M’, or XCEL-H’, The Multi-Accel/Decel Time (I/O-25 ~ I/O-38) has the priority.Output FrequencyMax. Frequency0Accel/DecelChangeFrequencySetting RangeLCD 7-SegMax freq 0Delta freq 1Related Functions:FU2-71: Accel/Decel Time ScaleFU2► Time scale71 0.1 secDescriptionThe Accel/Decel time is the time thattakes to reach the maximumfrequency from 0 Hz.The Accel/Decel time is the time thattakes to reach a target frequencyfrom a frequency (currently operatingfrequency).DRV-01, DRV-02 [Accel/Decel Time]FU2-71 [Accel/Decel Time Scale]I/O-25 ~ I/O-38 [1 st ~ 7 th Accel/Decel Time]711Factory Default: 0.1 sec 0.1This is used to change the time scale.DRV-01 [AccTime]I/O-25 [Acc Time1]DRV-02 [DecTime]I/O-26 [Dec Time1]Related Functions:DRV-01, DRV-02 [Accel/Decel Time]FU2-70 [Reference Freq. for Accel/Decel]I/O-25 ~ I/O-38 [1 st ~ 7 th Accel/Decel Time]FX[Accel/Decel Change Operation]FU2-70: Reference Frequency for Accel/DecelFU2►Acc/Dec freq70 Max freq70Factory Default: Max freq 00Setting RangeLCD 7-Seg0.01 sec 00.1 sec 11 sec 2DescriptionThe Accel/Decel time is changed by 0.01second. The maximum setting range is600 seconds.The Accel/Decel time is changed by 0.1second. The maximum setting range is6000 seconds.The Accel/Decel time is changed by 1second. The maximum setting range is60000 seconds.This is the reference frequency for acceleration anddeceleration. If a decided Accel/Decel time from afrequency to a target frequency is required, set this valueto ‘Delta freq’.FU2-72: Power On DisplayFU2►PowerOn disp72 072Factory Default: 0 00This code selects the parameter to be displayed first onkeypad (DRV-00) when the power is turned on.114