Manual - Famco

CHAPTER 7 -OPTIONSThe iS5 series inverter provides many options for various applications. See the following option table and select theproper options according to your application.Internal InstallationExternal InstallationOption Name DescriptionSub BoardsKeypadSub-A Board(Extended I/O)Sub-B Board(Speed Feedback)¨Extended I/O Module¨ Three Multi-Function Inputs (P4, P5, P6)¨ Three Multi-Function Outputs (Q1, Q2, Q3)¨ Auxiliary Analog Frequency Reference (V2)¨ LM (Load Meter) Output (0 ~ 10V)¨ Encoder Pulse Input – Speed Feedback (AOC, BOC / A+, A-, B+, B-)¨ Encoder Pulse Output (FBA, FBB)¨ Vector control (PG operation) and reference freq via pulse input¨Extended I/O Module¨ Three Multi-Function Inputs (P4, P5, P6)Sub-C Board¨ One Multi-Function Outputs (Q1)(Extended I/O)¨ Isolated Auxiliary Analog Frequency Reference (V2)¨ Two Isolated Analog Meter Output (AM1, AM2)¨ Connection with Fnet Communication Module for GLOFA PLCPLC Communication¨ Inverter Connection: Max. 64(F-Net)¨ Baud Rate: 1M bps¨ RS-485 CommunicationRS-485 ¨ Inverter Connection: Max. 32¨ Baud Rate: Max. 19200 bps¨ 32-Character DisplayLCD¨ Download and Upload from the Keypad7-Segment ¨ Six Digit 7-Sengment DisplayRemoteCableRemote Cable ¨ 2m, 3m, 5m long keypad cables for separate keypad installationDynamic DB Resistor ¨ Enables Inverter to decelerate rapidly.Braking DB Unit ¨ DB units are provided as an option for 40 ~ 100 HP inverters.☞ Note: Refer to option manual for more details.153