Manual - Famco

Chapter 6 - Parameter Description [I/O]Output VI/O-41*10 V10 V[FDT-1]When the output frequency reaches the referencefrequency (target frequency), AXA-AXC terminal isCLOSED.FM-5G0 % 100I/O-40Output FrequencyReference FrequencyI/O-43 / 2I/O-44: Multi-function Auxiliary Contact Outputdefine (AXA-AXC)I/O► Aux mode44 Run4412Factory Default: Run 12AXA-AXCCLOSEDTimeTimeThe auxiliary contact works (Close) when the definedcondition has occurred.Setting RangeLCD 7-SegDescriptionFDT-1 0 Output frequency arrival detectionFDT-2 1 Specific frequency level detectionFDT-3 2 Frequency detection with pulseFDT-4 3Frequency detection with contactclosureFDT-5 4Frequency detection with contactclosure (inverted FDT-4)OL 5 Overload detectionIOL 6 Inverter overload detectionStall 7 Stall prevention mode detectionOV 8 Over voltage detectionLV 9 Low voltage detectionOH 10 Overheat detectionLost Command 11 Lost command detectionRun 12 Inverter running detectionStop 13 Inverter stop detectionSteady 14 Steady speed detectionINV line 15COMM line 16Exchange signal outputsSsearch 17 Speed search mode detectionStep pulse 18 Step detection in Auto modeSeq pulse 19 Sequence detection in Auto modeReady 20 Inverter ready detectionTrv. ACC 21 Traverse acceleration frequencyTrv. DEC 22 Traverse deceleration frequencyMMC 23 Used for MMC operationZspd Dect 24 0 rpm Detection in Vector controlTorq Dect 25 Torque Detection[AXA-AXC configured as ‘FDT-1’][FDT-2]AXA-AXC is CLOSED when the reference frequency isin I/O-43 [FDT Bandwidth] centered on I/O-42 [FDTFrequency], and the output frequency reaches I/O-43centered on I/O-42.Output FrequencyI/O-42AXA-AXCCLOSEDReference Frequency[AXA-AXC configured as ‘FDT-2’]I/O-43 / 2[FDT-3]AXA-AXC is CLOSED when the output frequencyreaches the band centered on the FDT frequency. Theoutput is OPENED when the output frequency goesoutside the FDT bandwidth centered on the FDTfrequency.TimeTime129