Manual - Famco

Chapter 2 - Operation2.4 Operation MethodThe iS5 has several operation methods as shown below.Operation Method Function Function SettingOperation using Keypad Run/Stop command and frequency are set only through thekeypad.DRV 03: KeypadDRV 04: Keypad-1 or -2Operation usingControl TerminalsClosing FX or RX terminal performs Run/Stop.Frequency reference is set through V1 or I or V1+I terminal.DRV 03: Fx/Rx-1 or -2DRV 04: V1 or I or V1+IOperation using bothKeypad and ControlTerminalsRun/Stop is performed by the keypad.Frequency reference is set through the V1 or I or V1+Iterminal.Closing FX or RX terminal performs Run/Stop.Frequency reference is set through the keypad.DRV 03: Keypad-1 or -2DRV 04: V1 or I or V1+IDRV 03: Fx/Rx-1 or -2DRV 04: Keypad-1 or -2Operation usingOption BoardOperation using option board.The iS5 has five option boards and three sub-boards.Option Boards: RS485, Device-Net, F-Net, ProfiBus andModBusSub-Boards: Sub-A Board, Sub-B Board, Sub-C Board(Please refer to ‘Chapter 7 - Options’ for more information.)32