Manual - Famco

Chapter 2 - Operation2.2.3 Parameter Navigation (LCD Keypad)The parameter group moves directly to DRV group by pressing [SHIFT/ESC] key in any parameter code.Drive Group FU1 Group FU2 Group I/O GroupMODEDRV▶T/K 0.0 A00 STP 0.00 HzMODEFU1▶ Jump code00 1MODEFU2▶ Jump code00 30MODEI/O▶ Jump code00 1▶◀▶◀▶◀▶◀MODEMODEMODEMODEDRV▶ Acc. time01 10.0 secFU1▶Run prohibit03 NoneFU2▶ Last trip-101 -------I/O▶ V1 filter01 10 ms▶◀▶◀▶◀▶◀MODEMODE MODE MODEDRV▶ Dec. time02 20.0 secFU1▶Acc. pattern05 LinearFU2▶ Last trip-202 -------I/O▶ V1 volt x102 0.00 V▶◀▶◀▶◀▶◀MODEMODEMODEMODEDRV▶ Drive mode03 Fx/Rx-1FU1▶Dec. pattern06 LinearFU2▶ Last trip-303 -------I/O▶ V1 freq y103 0.00 Hz▶◀▶◀▶◀▶◀MODE MODE MODE MODEDRV▶ Freq mode04 KeyPad-1FU1▶ Stop mode07 DecelFU2▶ Last trip-404 -------I/O▶ V1 volt x204 10.00 V▶◀▶◀▶◀▶◀MODEMODEMODEMODEDRV▶ Step freq-105 10.00 HzFU1▶ DcSt value08 50 %FU2▶ Last trip-505 -------I/O▶ V1 freq y205 60.00 Hz............◀▶◀▶◀MODE MODE MODE MODE▶◀▶DRV▶ Fault12 -------FU1▶ Stall Level60 150 %FU2▶ Para. lock94 0I/O▶ Way1 / 2D60 Forward27