Manual - Famco

Chapter 7 - Options7.3.2 Terminal Configuration+24V DC24VGroundQ1 EXTG NC P4 P5 P6 CM NC GND V2 AM1 AM2 VR GND7.3.3 Terminal DescriptionInputOutputSection Terminal Name DescriptionContact InputAnalogFrequencyReferenceAnalog VoltageP4, P5, P6 Multi-Function InputUsed as the extended function of P1, P2, P3(I/O-12 ~ I/O-14).CM Common Terminal Common terminal for P4, P5, P6VR Power supply for V2 DC voltage output terminal for V2 (+12V, 10mA)V2 Analog Voltage InputAnalog voltage or current input terminal for frequency reference oroverride. (0 ~ 10V DC, 4 ~ 20mA)Connecting jumper pin (J1) select current input.5G Common Terminal Common terminal for VR and V2AM1 Analog Meter 1AM2 Analog Meter 2Used to monitor one of Output Frequency, Output Current, OutputVoltage, DC link Voltage(0 ~ 10V DC analog output, 1mA)GND Common Terminal Common terminal for LMOpen Collector Q1 Multi-function Output Used as the extended function of AXA, AXC (I/O-44)Output EXTG External Common Terminal Common terminal for Q1NCNot Used7.3.4 Parameters of Sub-C BoardCode Parameter Description Code Parameter DescriptionEXT-01 Sub Board Type Display EXT-09 Analog Voltage Input Signal (V2) AdjustmentEXT-02EXT-10EXT-03 Multi-Function Input Terminal (P4, P4, P6) define EXT-30 Multi-function Output Terminal (Q1) defineEXT-04EXT-40EXT-05 V2 Mode Selection EXT-41EXT-06 Filtering Time Constant for V2 Input Signal EXT-43EXT-07EXT-08Analog Voltage Input Signal (V2) AdjustmentEXT-43AM1, AM2 Adjustment162