Manual - Famco

Chapter 7 - Options7.4 Communication option boards7.4.1 F-Net (Needed for Communication with LS GLOFA PLC)Open network system protocol based on IEC/ISA FieldBus² Specification• Topology: Linear Bus Topology• Band Method: Baseband• Protocol: Fnet Protocol• Media Access Method: Token• Drive link: Fiber optics• Number of nodes: up to 64 nodes/Bus• Max. Data transmission size: 256byte• Baud rate: 1Mbps• Transmission distance: 750m Max.• Error check: CRC-16• Encoding method: Menchester Biphase-L• Station: 0 – 63 (Setting via Keypad. Dip-switch not provided)7.4.2 Device-Net (Field bus)² Features• Topology: Linear Bus Topology• Band Method: Baseband• Protocol: DeviceNet Protocol• Media Access Method: CSMA/CD-NBA• (Carrier Sense Multiple Access / Collision Detection – Nondestructive Bitwise Arbitration)• Drive link: 5-wire Cable (Twisted Pair)• Number of nodes: 64 nodes/Bus Max• Max. Data transmission size: max 8 bytes (64bits)• Data rates and Max. Cable length (thick): 125kbps (500m/1640ft), 250kbps (250m/820ft), 500kbps(100m/328ft)² Specification• Device type: AC Drive• Communication control method:1 Explicit Peer to Peer Messaging2 Master/Scanner (Predefined M/S Connection)3 I/O Slave Messaging: Polling Connection• Baud rate: 125kbps, 250kbps, 500kbps• Supply voltage: 11 - 25V• Faulted Node Recovery• Station: 0 – 63 (Setting via Keypad, Dip-switch not provided)• Output Assembly Instance: 20, 21(100, 101 vendor specific)• Input Assembly Instance: 70, 71(110, 111 vendor specific)• Open Style Connector• Interface: DPRAM• Supports EDS files* Refer to communication option manuals for details.163