Manual - Famco

Chapter 5 - Parameter List5.6 Communication Group [COM]COM group appears only when the corresponding Option Boards are installed. Please refer to the option manual fordetail.CodeDescriptionKeypad DisplaySetting RangeLCD 7-Segment LCD 7-SegmentUnitsFactoryDefaultCOM-00 Jump to Desired Code # Jump code Not displayed 0 to 99 Not available 1 1 YesCOM-01 Option Board Type Opt B/D 01COM-02 Option Mode Opt Mode 02None 0Device Net 1Synchro 2PLC-GF 3Profibus-DP 4Digital-In 5RS485 6Modbus-RTU 7None 0Command 1Freq 2Cmd + Freq 3Adj.DuringRun- None Yes- None NoCOM-03 Option Version Opt Version 03 - - - - NoCOM-04Binary Option InputSelectionD-In Mode 048 Bit Bin 08 BCD 1% 18 BCD 1Hz 212 Bit Bin 312 BCD 0.1% 412 BCD 0.1Hz 512 BCD 1Hz 6- 8 Bit Bin NoCOM-05 Binary Input Filter Value Digital Ftr 05 2-50 1 15 YesCOM-06COM-07Input Torque Limit(Option)Control Mode Select(Option)Opt TrqLmt 06Opt CntlMode 07None 0TrqLmt 1None 0Opt Control 1COM-10 Device Net ID MAC ID 10 0-63 1 0 YesCOM-11COM-12Device NetCommunication SpeedDevice Net OutputInstanceBaud Rate 11Out Instance 12COM-13 Device Net Input Instance In Instance 13COM-17PLC Option StationNumber125 kbps 0250 kbps 1500 kbps 220 021 1100 2101 370 071 1110 2111 3NoneNoneYesNo- 125 kbps Yes- 20 No- 70 NoStation ID 17 0 to 63 1 1 YesCOM-20 Profibus ID Profi MAC ID 20 0 to 127 1 1 YesCOM-30 Output Number Output Num 30 0 to 8 1 3 YesPage74