Manual - Famco

Chapter 6 - Parameter Description [DRV]Output FrequencyFreq. max0V10V[Freq Mode: ‘V1’]Reference Freq. RangeAnalog SignalInput (V1)DRV-05 ~ DRV-07: Step Frequency 1 ~ 3DRV► Step freq-105 10.00 Hz0510.00Factory Default: 10.00 Hz 10.00DRV► Step freq-206 20.00 Hz0620.00Factory Default: 20.00 Hz 20.00Output FrequencyFreq. MaxDRV► Step freq-307 30.00 Hz0730.00Factory Default: 30.00 Hz 30.004mA20mA[Freq Mode: ‘I’]Reference Freq. RangeAnalog SignalInput (I)The inverter outputs preset frequencies set in thesecodes according to the multi-function terminalsconfigured as ‘Speed-L’, ‘Speed-M’ and ‘Speed-H’. Theoutput frequencies are decided by the binarycombination of P1, P2, P3 configured in I/O-12 to I/O-17.Refer to the following table for the preset frequencyoutputs.Output FrequencyFreq. Max0V+4mA10V+20mA[Freq Mode: V1+’I’]Reference Freq. RangeAnalog SignalInput (‘V1+I’)Binary Combination ofP1, P2, P3Speed-L Speed-M Speed-HOutputFrequencyStep Speed0 0 0 DRV-00 Speed 01 0 0 DRV-05 Speed 10 1 0 DRV-06 Speed 21 1 0 DRV-07 Speed 3Output FrequencySpeed 0Speed 3Related functions:DRV-00 [Digital Command Frequency orCommand Torque]FU2~39 [Control Mode Selection]I/O-01~10 [Analog Voltage/Current inputsignal adjustment]Speed 2Speed 1P1-CMONONTimeTimeP2-CMP3-CMON[Step Frequency Output]TimeTime83