Manual - Famco

Chapter 1 – Installation1.4 Other Precautions• Do not carry the inverter by the front cover.• Do not install the inverter in a location where excessive vibration is present. Be cautious when installing onpresses or moving equipment.• The life span of the inverter is greatly affected by the ambient temperature. Install in a location where temperatureare within permissible limits (- 10 ~ 40 ℃).• The inverter operates at high-temperatures - install on a non-combustible surface.• Do not install the inverter in high-temperature or high-humidity locations.• Do not install the inverter in a location where oil mist, combustible gas, or dust is present. Install the inverter in aclean location or in an enclosed panel, free of foreign substance.• When installing the inverter inside a panel with multiple inverters or a ventilation fan, use caution.If installed incorrectly, the ambient temperature may exceed specified limits.PanelPanelVentilating fanInverterInverterInverterCooling fanInverterGOOD (O)BAD (X)GOOD (O)BAD (X)[When installing several inverters in a panel][When installing a ventilating fan in a panel]• Install the inverter using screws or bolts to insure the inverter is firmly fastened.UL Remark (File number: E124949):“Only intended for use in an enclosure with maximum surrounding air temperature of 45℃” orequivalent: Models SV022iS5-2/4, SV037iS5-2/4, SV055iS5-4 (not -2), SV075iS5-4 (not -2),SV110iS5-2/4, SV150iS5-2/4, SV185iS5-2/4 and SV220iS5-2/4.7