13.07.2015 Views

Brown Field Municipal Airport Land Use Compatibility Plan

Brown Field Municipal Airport Land Use Compatibility Plan

Brown Field Municipal Airport Land Use Compatibility Plan

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

CHAPTER 3BROWN FIELD MUNICIPAL AIRPORT POLICIES AND MAPSif applicable, and a copy of the final FAA findings from its aeronautical study (i.e., notice ofdetermination letter).(c) The requirement for notification to the FAA shall not trigger an airport compatibility reviewof an individual project by the ALUC unless the general plan of the local agency in whichthe project is to be located has not been deemed consistent with this <strong>Compatibility</strong> <strong>Plan</strong>.3.5.4 ALUC Airspace Obstruction Criteria: The ALUC criteria for determining the acceptability of aproject with respect to height shall be based upon: the standards set forth in Part 77, Subpart C;the TERPS; and applicable airport design standards published by the FAA. Additionally, theALUC shall, where an FAA aeronautical study of a proposed object has been required, take intoaccount the results of that study.(a) Except as provided in Paragraphs (b) and (c) of this policy, no object, including a mobileobject such as a vehicle or temporary object such as construction crane, shall have a heightthat would result in penetration of the airspace protection surfaces depicted for the <strong>Airport</strong>on Exhibits III-3 and III-4. Any object that penetrates one of these surfaces is, by FAAdefinition, deemed an obstruction.(b) Objects shall be limited in height consistent with airspace protection surfaces defined byPart 77 and TERPS within portions of the airspace protection area (within the primarysurface and beneath the approach and transitional surfaces). Elsewhere within the airspaceprotection area, no object shall be limited to a height of less than 35 feet above the groundeven if the object would constitute an obstruction (i.e., penetrate Part 77 or TERPSsurfaces).(c) A proposed object having a height that exceeds the <strong>Airport</strong>’s airspace protection surfaces iscompatible with airspace protection only if all of the following apply:(1) As the result of an aeronautical study, the FAA determines that the object would not be ahazard to air navigation; and(2) FAA or other expert analysis conducted under the auspices of the ALUC or the airportoperator concludes that, despite being an airspace obstruction (not necessarily a hazard),the object would not cause any of the following:• An increase in the ceiling or visibility minimums of the <strong>Airport</strong> for anexisting or planned instrument procedure (a planned procedure is one that isformally on file with the FAA or that is consistent with the FAA-approvedALP);• A diminution of the established operational efficiency and capacity of the<strong>Airport</strong>, such as by causing the usable length of the runway to be reduced; or3–58<strong>Brown</strong> <strong>Field</strong> <strong>Municipal</strong> <strong>Airport</strong> <strong>Land</strong> <strong>Use</strong> <strong>Compatibility</strong> <strong>Plan</strong>January 25, 2010 Amended December 20, 2010

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!