Architectural_Design_with_SketchUp

Architectural Design with SketchUp
Example 4.3: Mullion Windows
In this example, we use the Windowizer plugin to create storefront windows for an otherwise
quite plain concrete building. Make sure the plugin is installed before you continue.
1. Start with a box. In this example, we use a 30f × 30f square, which we pulled up by 15f,
and to which we then applied a concrete texture.
2. Create locations for the windows. For this example, we offset the front facade by 2f and
then pushed it inward by 1f.
3. On the facade rectangle, draw lines wherever you want to have mullions. This breaks the
large face into many small ones.
102