3Designing with NevoStudio Pro

Working with Buttons Designing with NevoStudio Pro
Adjusting Button Appearance
1. Align or space the buttons as necessary:
a. Select one or more buttons by doing one of the following:
• Click on the page in the Design panel and drag until the
appropriate buttons are highlighted:
• Click a button, then press and hold CTRL (�) on your
keyboard, and click one or more additional buttons.
b. Click an alignment or spacing option on the toolbar:
• Click to align the buttons to one of the four
specified sides, or centered, based on the positions of all the
buttons selected.
• Click to evenly space the buttons in the specified
dimension between the starting position of the first button and
the ending position of the last button.
• Click to align the entire selection relative to the whole
page in the specified dimension. For example, if you have a
single button selected, that button will be aligned to the
horizontal or vertical center of the page. If you have multiple
buttons selected, the set of buttons will be aligned, but will not
change position relative to each other.
88 NevoStudio Pro Design Guide