3Designing with NevoStudio Pro

Working with Projects Designing with NevoStudio Pro
Importing Nevo Configuration (.NVO and .NVP) Files
You can import Nevo configurations into a job. This is helpful when dealing
with Nevo SL project files, which must be imported into NevoStudio Pro
before they can be modified.
You can use the import function to replace configurations by adding a new
configuration and deleting the configuration you want to replace and
assigning the correct name to the imported configuration.
1. Use one of the following methods:
• Click File|Import Nevo Configuration
• Right-click job and select Import Nevo Configuration
• Drag configuration from one job to another
• Copy/Paste from one job to another
a. If you selected Import Nevo Configuration, The following dialog
appears:
b. Type the drive and folder of the configuration you are importing or
click to browse for a location.
NevoStudio Pro will import the configuration.
Installer Tip: If the name of the Configuration or any of its components is a
duplicate of an existing name, NevoStudio Pro will require you to
rename it.
2. Click Next. NevoStudio Pro adds a controller to the end of the list of
configurations in the job list.
3. Click Finish.
36 NevoStudio Pro Design Guide