3Designing with NevoStudio Pro

Installing and Updating Nevo Software Installing
4. Maximize NevoStudio Pro.
5. Connect Nevo to the design computer, via the supplied USB cable:
Installer Tip:We recommend not using USB ports that are on a hub,
keyboard, or monitor.
Installer Tip: If ActiveSync prompts you to set up a partnership for Nevo,
answer No and follow the instructions on-screen.
NevoStudio Pro installation creates a special kind of partnership
with Nevo devices. This silent partnership will allow you to
connect any Nevo without having to create a new partnership for
each one (or to operate under guest mode). You can cancel out of
the ActiveSync prompt and allow Nevo to establish the silent
partnership.
There is one side effect that you need to consider that would make
a silent partnership unsuitable for you. If you previously had a
different mobile device (PDA, mobile phone) with a named
partnership, that partnership will now also be silent. You will not
be able to open ActiveSync on your computer (but you will be able
to Synchronize if Sync is initiated from the mobile device).
An alternative is to create a guest partnership (or a named
partnership), however, you will need to created a new named
partnership (or set up a guest partnership) for each Nevo that you
connect to this computer.
6. Start designing!
NevoStudio Pro Design Guide 7