3Designing with NevoStudio Pro

Working with Symbols Working with Gallery Items
Deleting Button Images
To remove a button set from the gallery, navigate to the image file using any
file location method and delete it.
Installer Tip: Before removing an image from the gallery, exit NevoStudio
Pro, navigate to the image file using Windows File Explorer, then
delete the image file. If you delete images that were shipped with
the NevoStudio Pro gallery, these images will be reinstalled when
you update NevoStudio Pro.
Working with Symbols
The symbol gallery contains symbols that you can assign to buttons.
Symbols come in three sizes. The sizes are designed to fit on specific button
types:
Size Is designed for...
Small (40x40) Bar buttons in the miscellaneous button folder.
The image is smaller and there is a larger
transparent gap bewteen the edge of the image
and the visible part of the image.
Medium (40x40) Any button that does not require a gap between
the button edge and the image.
Large (80x80) Activity (key-shaped) buttons.
See “Assign a symbol to a button:” on page 89 for more information on
adding symbols to buttons.
Working with Device Templates
Device templates are a set of pages that you can apply when you add a
device through the Add Device Wizard (see “Working with Devices” on
page 41). Device templates use an .nvt file extension to identify them as
templates (as opposed to .nvp configuration files or .nvj job files). They
simplify and speed up creating configurations, since they automatically add
a set of pages that already contain the buttons a particular device type
might need. NevoStudio Pro automatically assigns the correct device IR
codes to these buttons via the wizard when adding IR devices.
NevoStudio Pro provides several pre-defined templates. If you wish to use
different templates, you can create your own from existing configurations.
114 NevoStudio Pro Design Guide