3Designing with NevoStudio Pro

Designing with NevoStudio Pro Working with Devices
Step 2 Option E: Adding Devices by Learning IR Functions
1. Start the Add Device Wizard, then choose Add IR Device and click Next:
2. Select Learn IR Functions and click Next:
3. Connect the controller that will learn the functions to the design
computer by using the supplied USB cable or by using a wireless
network (for WiFi enabled controllers).
4. Locate the remote for the device you want to learn IR codes from. Align
the source remote with Nevo, no further than 5 inches apart, preferably
between 2in and 5in (5.08cm and 12.7cm):
OK
2" - 5"
5.08cm - 12.7cm
NevoStudio Pro Design Guide 49