3Designing with NevoStudio Pro

Setting Up Wireless Networking on Nevo S70 Configuring Nevo Ecosystems
• In an elevated location such as a high shelf, mounted to the ceiling, or in
the room above
• Away from potential sources of interference, such as computers,
microwaves, and cordless phones
CAUTION: Wireless Phones working in 2.4GHz spectrum will cause
significant interference with 802.11g which can disable any
communication in the house. We recommend using phones working
in other frequency spectrums such as 5GHz.
• With the antenna(s) extended
• Away from large metal surfaces
Adding Access Points
1. Determine the SSID, or name, of the access point to which you want to
connect. If you know the IP Address of the access point (generally
available in the manufacturer’s setup guide), you can log into it and
discover the SSID.
2. Double-tap Add New…:
Installer Tip: You may need to drag the keypad out of the way before
changing the following settings.
3. Set all of the wireless properties on Nevo S70 to exactly match those on
the Access Point. See “Editing Access Points” on page 144 for details on
these properties.
4. Tap OK to save the settings and close the Wireless Settings screen, or X
to exit without saving the changes.
146 NevoStudio Pro Design Guide