3Designing with NevoStudio Pro

Designing with NevoStudio Pro Editing IR Devices
Adding IR by HEX Code
1. Start the Edit Device Wizard as described on page 65 and click the
Functions tab.
2. Put a checkmark in the box next to each IR command you want to enter
a HEX code for.
3. Click Enter HEX Code. NevoStudio Pro will validate the entered HEX
code to ensure that it is a usable code.
4. Click Next to enter a HEX code for the next item in the list.
5. Click OK.
NevoStudio Pro Design Guide 69